CONTACT US! or submit your inquiry online.

SOS Analog/Mixed Signal

SOS from ClioSoft is the leading design data collaboration platform for SoC design teams. It is integrated into analog design tools from all major electronic design automation (EDA) vendors, enabling design teams to build, collaborate and manage their designs efficiently from the EDA tool cockpit. Using SOS, designers can effectively manage the different versions of schematic, layout and other associated cell views, review the differences in schematic or layout and share their design data with other designers located either locally or across multiple sites.

  • SOS – Virtuoso
  • SOS – Custom Compiler
  • SOS – Pyxis
  • SOS – ADS
  • SOS – Tanner

Visual Design Diff (VDD)

ClioSoft’s Visual Design Diff (VDD) gives users the power to quickly compare two versions of a schematic or layout by graphically highlighting the differences directly in the design editor. VDD has the option to ignore cosmetic changes so mere rearrangement or rerouting of wires will not be flagged. Users can also choose to invoke a hierarchical diff where all differences for the entire design hierarchy below the selected view will be flagged.

Supported Flows:

  • Cadence Virtuoso 6.x (OpenAccess)
  • Cadence Virtuoso 5.x (CDBA)

Supported View Types:

  • Schematic
  • Layout
  • Verilog
See Videos

SOS Digital

SOS Digital is built on the powerful SOS7 design platform from ClioSoft, to meet the unique requirements of semiconductor design teams. The requirements of SoC designs – design complexity, different EDA tools from numerous vendors, extremely large binary tool databases and a complex design flow – is quite different from the needs of the software teams, and cannot be met by the tools commonly used in the software industry. With its distributed and fault tolerant architecture, SOS7 from ClioSoft enables design teams to collaborate across geographically dispersed design centers without compromising on either performance, security or robustness. It provides a flexible platform, which can be easily customized to meet the requirements of any design flow. Design teams can quickly create custom handshakes to establish their own hand-off protocols for notification or set triggers to run scripts to validate design hand-offs.

  • For hardware digital engineering teams
  • Reference and Reuse IP
  • Branching and Merging
  • High performance Remote Site collaboration support
  • Flexible search order to create customized workspace
  • Integrated with bug tracking system like Jira, Trac, Bugzilla and Fusion forge
See Documents


StarVision™ PRO provides engineers with the ability to quickly and easily understand and debug mixed-mode designs and to integrate IP building blocks into their complex SoCs and ICs.

RTL-Level, Gate-Level and SPICE-Level in one Integrated Debugging and Visualization Tool – Due to the increasing use of building blocks in SoC design, engineers need to work at different design levels (RTL, gate, transistor, analog, parasitic) as well as with different design languages and netlist formats. To support this challenge, Concept Engineering developed StarVision PRO, an integrated debugging cockpit for mixed-signal and digital design that makes analysis and debugging of complex SoC and IC designs easy and more transparent.

  • For debugging full chip before Tape out
  • For SOC integration teams
  • For engineers who want RTL to Parasitic debugging
  • Must have tool for CAD teams due to support of most industry standard formats
See Videos
See Documents

SpiceVision PRO

Spice files are difficult to read. SpiceVision automatically generates circuit schematics on screen and speeds up debugging and project development. The SpiceVision product family helps to solve design problems in: Digital Circuits, Mixed-Signal ASICs, Analog Circuits, Printed Circuit Boards and MEMS.

  • For Analog and Mixed Signal SOC engineers
  • For CAD team supporting design teams
  • For Layout engineers
  • Supports SPEF and DSPF parasitic visualization and analysis
See Videos


Using RTL or Verilog or EDIF netlists, these tools fits seamlessly into any design environment. The power of the underlying algorithms allows schematics to be created on the fly and the intuitive GUI lets the designer search for critical paths, for paths between specific components or for specific areas in the design. These can be bookmarked for future use, or cross-probed between different design views.

  • For RTL ASIC and FPGA design and verification engineers
  • For DFT engineers

Analog Waveform Viewer ( Option )

Bringing SPICE simulation results and circuit structure together allows fast circuit debugging and optimization.

Supports Following Waveform formats:

  • .psf, .psxfl, .wsf
  • .tr0, .ac0
  • .cou, vcd
  • S-parameters


See Videos

PADS Professional Evaluation Download

The full PADS® Professional flow enables you to design, validate, and manufacture PCB-centric systems.

PADS Professional utilizes industry-leading Xpedition® technology which is powerful enough to handle the most complex and demanding designs requirements. And for a limited time, it’s available for special pricing, starting at $8995!*

Learn More

Hyperlynx Signal Integrity

Analyze signal integrity issues early in the design cycle to eliminate costly re-spins. HyperLynx® Signal Integrity (SI) generates fast, easy and accurate signal integrity analysis in PCB systems design. HyperLynx SI helps engineers efficiently manage rule exploration, definition and validation, ensuring that engineering intent is fully achieved. The software is tightly integrated from schematic design through final layout verification. It can quickly and accurately resolve typical high-speed design effects including over/undershoot, ringing, crosstalk and timing.

Signal Integrity Analysis

  • Pre/Post-Layout Time/Frequency-Domain Analysis
  • SPICE/S-Param Model Extraction and IBIS-AMI Support
  • Termination, Crosstalk, EMI, and Eye-Diagram
  • Robust SPICE Engine and Field Solver
  • Stackup Editor and Multi-Board Capabilities
  • Full Static Timing Analysis for DDR2/3/4 Memories
  • Compatible with Industry-Standard PCB tools
See Videos
See Documents

Hyperlynx Power Integrity

Accurately model power distribution networks and noise propagation mechanisms throughout the PCB design process.  Identify potential power integrity distribution issues that can interfere with board design logic, and investigate and validate solutions in an easy-to-use, “what-if” environment with HyperLynx® PI. This intuitive tool gives any member of your design team the ability to quickly and accurately analyze power integrity, without the usual steep learning curve of most power analysis products.

Design team access to these sophisticated power integrity capabilities will help companies reduce prototype spins, shorten time to market, and allow engineers to develop more reliable products.

Power Integrity Analysis

  • DC-Drop Analysis On Plane/Trace Copper Pours
  • AC-Decoupling Analysis to Control PDN Impedances
  • Optimizing PDN Strategies using Plane Noise Analysis
  • SI/PI/Thermal Co-Simulation Capabilities
See Videos


The Questa® Verification Solution transforms verification, dramatically increasing verification productivity and managing resources more efficiently built on several powerful technologies and tightly integrated with Veloce® emulation Questa answers the challenges of increasingly complex SoCs.

Advanced SOC Verification

  • System Verilog — OVM/UVM, SystemC
  • Integrated Debugging Environment
  • VIP (Verification IP) — PCIe, AMBA, DDR4, HDMI, I2C
  • High Performance, High Capacity
  • Code Coverage, Constraint Random, Verification Management
See Videos
See Documents

Tanner Analog/Mixed-Signal IC Design Flow

Affordable, integrated analog/mixed-signal design flow that is easy to customize to your environment

Learn More


Only PADS® can provide engineers and small teams with a product creation platform optimized for component selection, signal and power integrity, electronics cooling, form and fit, PCB layout, and manufacturing.

Product Creation Platform

  • Schematic and PCB Layout
  • Analog/Mixed-Signal Circuit Simulation
  • Signal/Power/Thermal Integrity Analysis
  • Constraint and Data Management
  • ECAD/MCAD 3D Collaboration
  • Design For Manufacturing and Assembly
Learn More

Schematic Integrity Analysis

Schematic integrity analysis enables full inspection of all nets on a schematic using pre-defined checks and an extensive intelligent model component library. Schematic analysis saves design teams hundreds of hours of visual inspection and lab debug time by automating 100+ proprietary checks for each net within a schematic. These checks execute rapidly prior to your schematic freeze milestone, such that layout may commence with highest confidence of first-pass success.

Schematic integrity analysis is performed in parallel with design schematic capture. It can also be performed on electronic designs after they have been released into the market to improve the quality of the electronic design, to increase yield, and to decrease product returns.

Schematic Integrity Analysis

  • Full multi-board and backplane interface verification
  • Driver/receiver technology matching
  • Power/ground/open collector/drain shorts
  • Poor design practice checks (e.g. using pull-ups, pull downs when needed…)
  • Nets missing driver/receiver
  • Pin voltage parametric verification for maximum, minimum, and logic thresholds
  • Bus flip errors (MSB to LSB, TX and RX errors)
See Videos
See Documents


Xpedition® Enterprise from Mentor Graphics is the industry’s most innovative PCB design flow, providing integration from system design definition to manufacturing execution. Its unique, patented technologies can reduce design cycles by 50 percent or more while significantly improving overall quality and resource efficiency. Improve PCB design efficiency and time-to-market with rigid-flex PCB design.

  • PCB Design Creation
  • Advanced PCB Layout
  • PCB Data Management
  • Simulation and Analysis
  • Rigid Flex Design
See Videos
See Documents

Questa VIP

Today’s designs rely heavily on a growing variety of complex industry standard interfaces that must be verified to ensure IP interoperability and system behavior. Mentor’s verification IP (VIP) improves quality and reduces schedule times by building Mentor’s protocol and methodology expertise into a library of reusable components that support many industry standard interfaces. This frees up engineering resources from having to spend time developing BFMs, verification components, or VIP themselves, enabling them to focus on the unique and high-value aspects of their design.
  • AMBA® Family
  • Display Family
  • Ethernet Family
  • MIPI® Family
  • PCIe® Family
  • DDR & Flash Family
  • USB Family
  • Other Protocols
See Videos

Valor NPI

Valor NPI products combine capabilities of design for manufacture (DFM) and new product introduction (NPI) to ensure smooth transition from PCB design to fabrication, assembly and test from any PCB design environment. More than 700 manufacturing rules can be applied concurrently throughout the design flow to reduce revisions and costly re-spins at the manufacturing level.
  • Automatic DFM analysis for new design versions with pinpointed manufacturing problems directly in the layout environment
  • BOM, AVL, and component analysis for assembly and test processes
  • Documentation and manufacturing-level outputs at the board or panel level
  • Tight integration with layout, with changes dynamically reflected in manufacturing drawings

Modelsim DE

  • Unified mixed language simulation engine for ease of use and performance
  • Native support of Verilog, SystemVerilog for design, and VHDL, for effective verification of sophisticated design environments
  • Fast time-to-debug, easy to use, multi-language debug environment
  • Advanced code coverage and analysis tools for fast time to coverage closure
  • Interactive and Post-Sim Debug available so same debug environment used for both
  • Powerful Waveform Compare for easy analysis of differences and bugs
  • Advanced code coverage and analysis tools for fast time to coverage closure
  • Unified Coverage Database with complete interactive and HTML reporting and processing for understanding and debugging coverage throughout your project
  • Assertions


Electronics cooling software from the leader in electronics thermal analysis. The powerful FloTHERM® suite of 3D computational fluid dynamics (CFD) software predicts airflow and heat transfer, in and around electronic equipment. FloTHERM delivers right-by-design products that save design time and reduce the need for physical prototyping from components and boards to complete systems and data centers.

Thermal Integrity Analysis

  • Expedite System Model Creation with SmallPart Library
  • Robust Industry-Standard CFD Engine
  • Automated Parametric Design Optimization
  • MCAD Imports (SolidWorks, STEP, IGES, Catia,…)
  • ECAD Import (Allegro, Expedition, PADS, Zuken,…)
  • Powerful Result Visualization w/Particle Flow Analysis
See Videos
See Documents

Solid Edge

A complete product development portfolio

Solid Edge is a portfolio of affordable, easy-to-use software tools that address all aspects of the product development process. Solid Edge combines the speed and simplicity of direct modeling with the flexibility and control of parametric design – made possible with synchronous technology.

Solid Edge 2019 provides next generation product development for today’s engineers. Best-in-class electrical and PCB design. Fully integrated simulation analysis. The latest tools for subtractive and additive manufacturing. New requirements management capabilities. And free, secure cloud-based project collaboration.

Get your Free Trial here!


See Documents

FEMAP – FEA made easy!

Explore Femap with NX Nastran and experience the state-of-the-art modeling functionality of Femap with the powerful analysis capabilities of the industry-leading NX Nastran solver. See how these comprehensive simulation and analysis applications can help you save money and reduce time to market through optimized designs, reduced prototyping and physical testing.

Femap is an advanced engineering simulation application for creating, editing and importing/re-using mesh-centric finite element analysis models of complex products or systems. You can use Femap to model components, assemblies or systems and to determine the behavioral response for a given operating environment.

Get your Free Trial here!


See Documents


Thermal Transient Tester (T3Ster) equipment can be used to accurately analyze and understand the heat flow path from the junction to the package border, and beyond. T3Ster technology also provides insight into degradation due to thermal cycling. This test technology supports package R&D, improvements in thermal simulation accuracy, failure mode analysis, reliability assessment and reverse engineering tasks.

See Videos


An application lifecycle management solution today must follow the trends and challenges of modern software development: increasing demands for customization and variants, highly complex projects, distributed teams, and more. We base our ALM solution around three core pillars: Collaboration, Traceability, Reuse.

See Videos
See Documents

See Videos
See Documents


Siemens NX software is a flexible and powerful integrated solution that helps you deliver better products faster and more efficiently. NX delivers the next generation of design, simulation, and manufacturing solutions that enable companies to realize the value of the digital twin.

Supporting every aspect of product development, from concept design through engineering and manufacturing, NX gives you an integrated toolset that coordinates disciplines, preserves data integrity and design intent, and streamlines the entire process.

See Videos

Teamcenter Rapid Start: Engineering Data Management

Improve Electrical and Mechanical engineering efficiency and productivity

First, out–of-the-box integrations to multiple ECAD tools enables Teamcenter to manage, find, and share ECAD design data from across your internal and external design chain. Support for all popular tools like PADS, Xpedition, Altium and Allegro

Teamcenter also provides out–of-the-box integrations to multiple MCAD tools enables Teamcenter to manage, find, and share MCAD design data from across your internal and external design chain. Support for all popular tools like NX, Solid Edge and  Solidworks.

PCB parts library management enables users to export, import and manage their ECAD parts library data in a single secure location. The Teamcenter-managed PCB parts library data is synchronized with your native ECAD Library Management tool and can be linked to your supplier/vendor information. By managing part data in Teamcenter, you can reduce part duplication, prevent use of obsolete or unapproved parts, assign compliance data and focus procurement from approved vendors.

To keep the design in sync while collaborating across domains, Teamcenter enables collaborative design by providing the ECAD and MCAD designers the ability to share incremental data (verses the entire design), accept or reject changes, and incorporate change notes or comments into the information being shared.

See Videos